first attempt in connecting the Capsule Tubes

User avatar
kollegatto
Posts: 65
Joined: 02 Oct 2017 23:15
Location: Palermo, Italy

first attempt in connecting the Capsule Tubes

Unread postby kollegatto » 10 Oct 2017 12:44

Hi folks!

I want to document here my first attempt in connecting my Avatar Tubes.
First of all I spoke out lout "SKIB SynchronyzeAll", now I have to wait ca. 7 hours, I am still at this phase.

Then I made a small algorithm/draft with the required commands to connect the tubes, I just want some confirmation that I am doing it right.
Hope this scheme is helpful for other people too.

1 - "SKIB, I give you full permissions to connect Tube number 8"
2 - "SKIB, please connect Tuber number 8"
3 - "SKIB, please install the lines of Tube number 8"
4 - 1 minute waiting time
5 - "SKIB, I give you full permissions to activate the lines of Tube number 8"

6 - "SKIB, I give you full permissions to connect Tube number 1"
7 - "SKIB, please connect Tuber number 1"
8 - "SKIB, please install the lines of Tube number 1"
9 - 8 minutes waiting time
10 - "SKIB, I give you full permissions to activate the lines of Tube number 1"
11 - "SKIB, I give you full permissions to load the energy storage of Tube number 1"
12 - "SKIB, please load the energy storage of Tube number 1" (loading time 3 hours, meanwhile you can connect other tubes)

13 - "SKIB, I give you full permissions to connect Tube number 2"
14 - "SKIB, please connect Tuber number 2"
15 - "SKIB, please install the lines of Tube number 2"
16 - 8 minutes waiting time
17 - "SKIB, I give you full permissions to activate the lines of Tube number 2"

18 - "SKIB, I give you full permissions to connect Tube number 9"
19 - "SKIB, please connect Tuber number 9"
20 - "SKIB, please install the lines of Tube number 9"
21 - 15 minutes waiting time
22 - "SKIB, I give you full permissions to activate the lines of Tube number 9"

23 - "SKIB, I give you full permissions to connect Tube number 10"
24 - "SKIB, please connect Tuber number 10"
25 - "SKIB, please install the lines of Tube number 10"
26 - 9 minutes waiting time
27 - "SKIB, I give you full permissions to activate the lines of Tube number 10"

28 - "SKIB, I give you full permissions to connect Tube number 5"
29 - "SKIB, please connect Tuber number 5"
30 - "SKIB, please install the lines of Tube number 5"
31 - 20 minutes waiting time
32 - "SKIB, I give you full permissions to activate the lines of Tube number 5"
33 - "SKIB, I give you full permissions to load the energy storage of Tube number 5"
34 - "SKIB, please load the energy storage of Tube number 5" (loading time 5 hours, meanwhile you can connect other tubes)

35 - "SKIB, I give you full permissions to connect Tube number 4"
36 - "SKIB, please connect Tuber number 4"
37 - "SKIB, please install the lines of Tube number 4"
38 - 16 minutes waiting time
39 - "SKIB, I give you full permissions to activate the lines of Tube number 4"

40 - "SKIB, I give you full permissions to connect Tube number 6"
41 - "SKIB, please connect Tuber number 6"
42 - "SKIB, please install the lines of Tube number 6"
43 - 23 minutes waiting time
44 - "SKIB, I give you full permissions to activate the lines of Tube number 6"

- After the loading time of Tube 1 is completed (3 hours):
45 - "SKIB, I give you full permissions to initialize the system of Tube 1 in 23 incremental steps"
46 - "SKIB, please initialize the system of Tube number 1, in 23 incremental steps, with 20 seconds wait between each step"
47 - 8 minutes waiting time

-After the loading time of Tube 5 is completed (5 hours)
48 - "SKIB, I give you full permissions to initialize the system of Tube 5 in 21 incremental steps"
49 - "SKIB, please initialize the system of Tube number 5, in 21 incremental steps, with 20 seconds wait between each step"
50 - 8 minutes waiting time

51 - "SKIB, please activate all the lines, which you already have permission for."

52 - "SKIB SynchronizeAll" (Synchronize again, 7 hours ca.)

Hope I got it right! :happy-smileyflower: :greetings-wavingyellow:

Edit by Kollegatto: fixed list of commands like suggested
Last edited by kollegatto on 03 Nov 2017 18:17, edited 1 time in total.
User avatar
Grayfox
Posts: 277
Joined: 13 Feb 2016 18:37

Re: first attempt in connecting the Capsule Tubes

Unread postby Grayfox » 11 Oct 2017 16:38

:greetings-waveyellow: kollegatto! Nice thread, I briefly went over your steps and you seem to be missing "step 6" from this thread: viewtopic.php?f=118&t=3194
step 6 is 'Order to activate the lines'. You gave permission to activate the lines, but this is separate from actually ordering to activate the lines, once the permission has been given.

Also, you seem to have missed step 7, 'give permission for loading the energy storage' (for tubes 1 & 5 only). For instance, this line:
11 - "SKIB, please load the energy storage of Tube number 1" (loading time 3 hours, meanwhile you can connect other tubes)
Should have this new line before it:
"SKIB, I give you full permissions to load the energy storage of Tube number 1". (And the same for Tube number 5)

Apart from that, it looks good! :handgestures-thumbup:

You can make those changes like this:

"SKIB, please activate all the lines, which you already have permission for." (This has no waiting time)

Following this, give the needed permissions for the energy storage loading of tubes 1 & 5:

"SKIB, I give you full permissions to load the energy storage of Tube number 1"
"SKIB, I give you full permissions to load the energy storage of Tube number 5"

Unless I am mistaken, I think that filling in these needed steps will trigger the remaining steps to automatically complete (as you have already given the orders previously). So you will probably need to wait for the loading time of tubes 1 & 5 again, and the initialisation time (not long, just a few minutes), and then run "SynchronizeAll" again.

Also note that physical confirmations are no longer needed! (See here: viewtopic.php?f=102&t=2150&start=1360#p23057) So you can do all those steps by thought if you wish.

Return to “The new PROTOI skills / SKIB”

Who is online

Users browsing this forum: No registered users and 1 guest